Tuesday, September 25, 2018

Alternate Fiend of Slaanesh and Flesh Hound Models from FFG

Fiends of Slaanesh are a really cool design and concept, but with only a single sculpt available, in resin, at US$25 each, they're kind of awkward to fit into an Army, and they look sort of wimpy next to their counterparts that have been updated to plastic kits, like the Beasts of Nurgle and Bloodcrushers. Flesh Hounds are in somewhat better shape, with 5 sculpts in the box, and a couple of plastic ones teased along with Korghos Khul and Magore's Fiends, but are still US$10 each on their own, in resin only.
A while ago, I stumbled across the Uthuk Y'llan for FFG's Runewars Miniatures Game, and was struck by the potential in some of their options for use as Chaos Daemons, particularly the ones I'm discussing here. It's not entirely surprising, as the Uthuk Y'llan make use of a great many summoned daemons (tho they call them other things), and almost certainly took inspiration from some of the same places GW did.


First up, we have the Spined Threshers, which feel pretty much perfect as an update for the Fiends of Slaanesh. Not as much of an improvement as I might like in terms of variety and price, since the two available sculpts are designed to be built one way, and the plastic used is very hard, but they are still an improvement in those regards, and their size and presence are vastly better.

Apparently in the Runewars fluff, they're made from multiple summoned daemons bound together into a single form, which is why they have multiple mouths all over the place. One mouth remains for each daemon that was bound into a given Thresher, I guess so they can individually feed or something. IDK, I haven't actually paid much attention to Runewars except for the Models.
Now, as I've mentioned, and as shown in the pic at the top of this post, they are much bigger than the current Fiends. But they are about the same size as the current Beasts of Nurgle, which were formerly close to the Fiends in size. So I feel like they'll make a pretty good alternate. I plan on knocking half an inch off any measurements where the larger base would benefit me, and since they have no shooting attacks, the greater height and profile are pure disadvantage. They can actually just barely squeeze onto 40mm bases, but it looked stupid, so I put them on 60s.
Flesh Hounds, as I said at the start, are in better shape, but can really suffer from lack of variety, especially when running multiple packs at once. I like to use a ton of them in minimum-sized packs, so I've made a practice of getting as many possible varieties as I can, to help keep them sorted out. The Flesh Rippers summoned by the Uthuk Y'llan seemed about perfect to form up another pack, since they have an aesthetic that's entirely compatible with Khornate stuff, but are distinctly different from any of the specific GW designs. They also cost about 60% of what the GW ones do.
Unfortunately, there are again only two sculpts, but they actually mix up fairly nicely when not ranked up, and it should be less noticeable when they're one of 8 Packs on the table. The other disadvantage is that they come attached to the rectangular bases you see here, but those are much softer plastic than the Models themselves, and so relatively easy to cut away. In terms of size, they match up quite nicely with GW Flesh Hounds.
Thinking about it just now, they'd probably also make good alternatives for Drukhari Khymerae as well. I'm looking forward to getting both lots of these painted up, but since (as usual) I have far too many projects going on, who knows when I'll get to them. When I do, I will put pics up here.

I have a couple more of the Heroes from Silver Tower ready to go, and several of the monsters very close to completion, so hopefully I'll get them wrapped up and photographed soon, and then I'll do another post of those to wrap up Neglected Model September. I'm also working on building and priming the stuff from the Rogue Trader boxed set and the Heresy Girls Kickstarter, so those are going to be my major goals for October. Until next time, y'all have a good one, y'hear!

9 comments:

  1. Yes a lot of the Daemonic beasts are really dated and sadly haven't aged well, these all look look like worthy proxies that surpass the originals in prettymuch all ways (expect the price on the first ones).

    ReplyDelete
    Replies
    1. The Spined Threshers are actually a little cheaper than GW Fiends, but not by as much. Threshers are US$35 for two, Fiends are $25 for one, so $50 to match the two you get from a box of Threshers. But even if they were the same, the Threshers are so much better Models.

      Delete
  2. Nice spots there - I'd probably pick up both if I could find them locally or elsewhere for a good price. I'd certainly be looking at using those hounds as Khymerae.

    ReplyDelete
    Replies
    1. Yeah, even in the US, they're kind of hard to find. There's a local store that has some RuneWars stuff, but I've never seen the Uthuk Y'llan there. I had to special order these.

      Delete
  3. Very cool alternatives! Looking forward to seeing what you do with them.

    ReplyDelete
    Replies
    1. It will probably be a while, but yeah, I think they're going to be pretty awesome once I get around to them.

      Delete
  4. there's no way I'd pay 25 bucks for the Fiend on the right (the 80's called etc.etc.) but the one on the left seems like a great alternative. I think the hounds are good too and the poses are cool and dynamic.

    ReplyDelete
    Replies
    1. The one on the right actually is the one from the 80s. The current one is nicer. But still tiny, and only one pose.

      Delete
  5. You could almost proxy the Fiend as a Zoat. Not that it would be much use to you in a modern day 40k game.

    ReplyDelete