Dreadtober Complete!

I think this might be a record for me. Not the completion, but actually posting my results before the end of the month! Anyhow, let's take a look at the actual Dreadnought first:

Oops, just noticed there were some more areas down underneath, like the pistons, that I forgot to go back and black out again. I'll get to it eventually, and it's not particularly noticeable in use.

The blue-green is Thousand Sons blue, with a rough highlight of Ahriman blue, and then a very heavy, splotchy wash/glaze with Army Painter green tone. It's a pretty cool effect in person, there's a subtle sort of camo pattern vibe, and from different angles and in different light, it looks more blue or more green. I went back over everything (at least theoretically) that wasn't an armour plate in black, and then gave all those areas a very light drybrushing with Stegadon Scale, just enough to make the detail visible, but not so much that the highlights themselves were visible. I use no metallic paints on my Sigma Chapter, doing everything that would normally be metallic in black like this instead. They're all about covert ops and such (Raven Guard Chapter Tactics), and don't want any gleam to give their positions away, so any metal surfaces are painted over or blued.

The lights are Nihilakh Oxide over white, a trick I picked up from Warboss Kurgan, and the rockets are light blue to indicate that they're anti-air (Anti-tank get white tips, anti-infantry get red). Simple drybrush up through the blues for the glow on the Plasma containment coils and a few more details picked out, and it's done!

I moved the Icarus Launcher over to the side because I like that look, sort of reminiscent of a lot of BattleTech stuff. Just a big wad of greenstuff filling in the gap. The launcher is magnetized, since the option to leave it off happened shortly after I'd finished the build here, and will almost never actually be used, since it kind of sucks.

The only other magnetized point is the waist. The legs are fixed in position, but the elbows and shoulders can rotate, and hold their positions well just through friction. I haven't painted the bits up yet, but I have the parts for the other weapon options as well, and those can also swap in just as pressure-fits.

A better look at the base, and another I did in the same style. You can see how the various spots of washes I dribbled over them have been mostly covered up by the successive layers of drybrushing, but still show through enough* to add some more variety to what would otherwise just be flat pavement.

The Armiger Helverin was done in my House Devine scheme, to add some support to my Renegade Knight from the summer. The whole thing was given a very heavy drybrush of Leadbelcher over the black primer, and then the major areas filled in with Balthasar Gold (highlighted with Gehenna's Gold), Xereus Purple, and Skullcrusher Brass.

The head and what's usually a hatch up top got done in Rakarth Flesh, which I half-assedly tried to blend into the mechanical parts around them, like the ceramite and whatnot is gradually morphing into daemonic flesh. Again, as with the full-sized Knight, I did an eye in the little window on the hatch. I left the Mechanicum/Mechanicus symbol on there because I figure that the Dark Mechanicum Techno-Magi who maintain these things consider themselves to be the true Mechanicum still, while it is the Adeptus Mechanicus who have lost their way.

No magnets whatsoever on the one, but it's still poseable, and completely swappable if a reasonably priced option for different arms becomes available. The waist joint gets some poster stick to hold it together, but the arms, carapace gun, and head are all just pressure fit, and hold perfectly.

I like to try to mess with bases that are this big, do something so they're not just a flat expanse, so this one got a chunk of insulation foam cut at an odd angle and trimmed to fit before I added on my usual basing stuff. I maybe should have made it a bit craggier, but it still fits well enough with the basing on its larger sibling.

I've got some stuff for Azazel's Unit-ed October to finish up this evening and take pics of, hoping to have those up sometime in the next couple of days. Until then, y'all have a good one, y'hear!

*That word combination is a pretty effective demonstration of how fucked up the English language is.

Sector Imperialis Breakdown

Now that clear pics are up for the sprues of the new Sector Imperialis kits, I decided to give them a look, see which ones look like they have the most potential, and which of the kits makes the best deal. Between the various kits, there are six different sprues referred to, some of which have two pictures on the website, but are apparently one sprue.

First off, we have the Ruins sprue. This is one of the two-parters, and is included in all the kits. The Sector Imperialis Ruins kit consists of only this sprue, but unless you're really desperate for more of them, it seems like a bad deal at US$35 for just the one sprue.

Pretty standard stuff, fairly similar to the previous Ruin kits. These can stand on their own, or be added on top of the intact wall sections to make ruined upper levels. Looks like there's a reason they're in every kit.

Next up, we have the Wall Sprue. Another common one, part of every kit other than the Ruins, and two of them are in the Sanctum and Basilicanum kits. These are where the scale differences from the previous GW Ruins really start to be noticeable, being far taller, and making use of that for some fairly impressive arched windows.

It is nice that half of them should be solidly LoS blocking for anything up to the height of a Rhino or so, but you might still want to "board up" some of the larger windows for better LoS blocking, since none of them are completely solid. Also, note that the two round vents in the sections on the left are the right size and heights to match the various pipeline fittings from the Sector Mechanicus range.

The last common sprue is the Floor Sprue. Or rather, the Ruins and Floor Sprue, since half of it is made up of partial wall sections and various fittings. The Administratum and Sanctum each come with one of these, while the Basilicanum has two.

The detail is great, but only getting 4 1/2 floor tiles feels a bit underwhelming. I kind of wish it were just the lower part doubled or something. I'll see how my opinion on that changes once I actually get my hands on them and can get a better feel for the size. I also like that the partial floor tiles are designed to fit together to make a damaged, but functionally intact tile.

The first of the more specific sprues is the Columns/Flying Buttresses/Small Statues Sprue. Available only in the Sanctum, there's some cool stuff on here, and the presence of this along with the extra Wall Sprue makes a good argument for shelling out the extra US$25 over the Administratum's US$50.

As I said, to me, this makes a pretty compelling upgrade over the smaller kit. There are tons of places where flying buttresses make sense to add on, and the statues have all kinds of potential uses. I also really like that the statue on the lower right is cast in two pieces, very cleverly so that they can fit together to build it intact, or look nicely shattered if the two parts are left separate.

The remaining sprues are unique to the Basilicanum kit so far. At least among the individual kits. The first of them, the Columns and Arches Sprue, is also included in the Kill Team starter set. It looks like this is mostly used for finishing off walls that would otherwise end with one of the open portions of the wall sections, and the large arched entryway.

Looks like one that's good to have around, but you probably wouldn't want a bunch of for most projects, so it makes sense to only have it in the one kit. Especially since it is in the starter set as well, which should make it relatively common on the secondary market.

Rounding out both the Basilicanum and the collection of sprues, we have another two-parter, the Large Statue Sprue. These guys look to be about on the same scale as the Space Marine statue from the Honoured Imperium. Or in other words, fucking huge. Definitely another that I don't mind being restricted to just one kit, tho I kind of wonder if they're going to get released on their own at some point.

Tossing in one of the painted pics here as well, since the sprue pic doesn't show the front of them. They look pretty cool, and also like they can improve the LoS blocking of the wall sections significantly, which is very nice.

Breaking it down differently, these are available as four individual kits, plus the Kill Team starter. In increasing order of cost, we have:

• At US$35, the Ruins set, which as far as I can tell, consists of just one of the Ruins Sprue. Doesn't seem like a very good deal compared to option #2.
• The Administratum set. US$50, only $15 more than the Ruins, and it also comes with one each of the Wall and Floor Sprues.
• Stepping up to US$75, we have the Sanctum, adding another Wall Sprue and the Flying Buttress/Small Statue Sprue. Seems like a pretty reasonable upgrade price for the extra content. Basically a 50% price bump for a 67% content bump, and it's the only place to get the Small Statue Sprue.
• The Basilicanum, the last and largest of the stand-alone sets, swaps the Flying Buttress/Small Statue Sprue for the Columns and Archways Sprue, and adds a second Floor Sprue and the Large Statue Sprue. At US$100, that's another $25 to jump from 5 to 7 (almost 8, because the statues are huge) sprues. Again, seems like a reasonable differential, but it's clearly one you're only going to get if you want the big statues.
• Finally, at US$130, the KT starter doesn't quite come with an exact match for any particular combination of kits, but is roughly equivalent to one each of the Ruins, Administratum, and Sanctum sets (just with the different Column Sprue), which would be US$160 to pick up separately. Add in the two Units (whether using them or selling them), and that's a pretty good bundle deal.

From what I see, the best way to go for general purposes is a mix of the Administratum and Sanctum sets. I do hope the Archway Sprue gets released as part of another kit at some point here, just to have it available without buying one of the US$100+ options. I don't feel like it's worth getting the Basilicanum for that sprue, that one's only worth the cash if you want the statues.

They did add a couple of different combos of the base sprues to the Sector Mechanicus line a while after the original release (the Promethium Forge and, IIRC, the Ferratonic Incinerator), so I wouldn't be surprised to see a couple more sets show up using just these sprues, and we'll probably also see some completely new add-ons as well, like the Galvanic Servo-Haulers and Promethium Regulators were for Sector Mechanicus.

Until next time, y'all have a good one, y'hear!

DreadTober III: Leftovers Edition

Having just finished a couple of builds, I realized I didn't have any projects ready to go from scratch for DreadTober. So I decided to dedicate this one to finishing off some of my WiP Dreads/Helbrutes, some of which have been sitting around since early 6th Ed. Probably not going to get to all of them but I'm going to be finishing up at least some of the following (left to right, front to back):

• Two Converted Helbrutes for my Death Guard
• A Furiouso and an IronClad for my Crimson Thunder
• A Forgefiend for my generic/Dark Mechanicum forces
• Another Forgefiend for the Thousand Sons
• A Redemptor and a Contemptor Mortis for my Alpha Legion

Looking forward to getting some more stuff table-ready, and also to seeing what all y'all come up with. Y'all have a good one, y'hear!

Dude. Want.

Damn, those Domitar-Ferrum Automata look great. I really can not afford to go on a FW binge and pick up a Mechanicum Army right now, but holy shit are they making it steadily harder to resist.

I've got a bunch of stuff at boring halfway stages right now. But it's all getting pushed back because my StormHawk just showed up this afternoon, and I can't wait to get building on that. Hopefully some pics and a bit of an after-action report on it Sunday evening or Monday. Until then, y'all have a good one, y'hear!

Kytan Build Complete plus Half-Painted House Phantos Imperial Knight

Got the Kytan built. Had to get kinda creative in a couple of places, since I was working from the feet up, with fixed positioning on them due to the basing, and ended up a bit beyond the limits of the posing FW intended, largely thanks to screwing up the angle of one of the ankles. Still looks pretty good overall, if I do say so myself:

Blood Claw to display futile bravery. Also scale.

This is pretty pic heavy, so I'm putting the rest below a cut. Click for more: